[Jacksont001]

That's the next project, JB's bungs in the valve cover....
Notice the bag on the right?

Yes I am quite insane

 

[GunNam]

I contemplated JB welding them, or threading them in...

but I decided to buy weld-in bungs. When they are welded, I'll use the left bag barb to thread them into the bung. I'm sure either way will work fine.

 

[INxGSRxTEG18]

Sorry to bring this back from the dead.. kinda.. but I have that PCV breather on my car, when I bought it, and now I want it gone. Is it ok to just buy a hose that would fit the "nipple" on the CAI and the engine.

My friend has a black rubber hose that fits on there, and we were going to put it on there, but I wasn't sure if it was ok.

 

[HeroOfTheDay]

Wow, I think this thread confused me more than the whole turbo install did.

Okay, so my PCV setup looks like this diagram, but without the catch can or the pcv valve...

If I add a catch can, with a PCV valve on top of it, can I use the turbo intake to provide a vacuum for the crankcase through the stock breather box?

 

[HeroOfTheDay]

I posted that kinda late last night, and I don't think anybody saw it, sorry for the accidental bumping...

^^^ Can anybody confirm that the setup above will work fine?

 

[JRutski]

Link to similar post

Just to add some ideas, comments, etc.

 

[BestodaBest]

Bringing this topic back from the dead...

I read through this entire article, and its obviously aimed at N/A motors...

What would be the most appropriate setup for a force induced engine?

Much Obliged,
Alex

 

[tony_2018]

oil catch can.