CLUTCH MASTER CYLINDER (CMC)
fooor sureee

 

before you start replacing parts try bleeding your clutch slave cylinder, it could have some air in it hence the soft pedal

 

i agree with mikey either that or the slave, both of mine were bad at around 90k

 

dont forget to check your fluid as well.. i tested out a gsr with a stage 3 clutch with that exact problem.. pointed out to the owner that he was low on fluids.. after he filled it up the pressure was right where it seemed to suppose to be at..

 

before you start replacing parts try bleeding your clutch slave cylinder, it could have some air in it hence the soft pedal


Quote: Int3graLove on Jan/20/10 dont forget to check your fluid as well.. i tested out a gsr with a stage 3 clutch with that exact problem.. pointed out to the owner that he was low on fluids.. after he filled it up the pressure was right where it seemed to suppose to be at..

CHA CHING.

The most likely culprit of the soft pedal feel is air in the line or a lack of fluid. Don't do anything until you've flushed topped up your clutch fluid for mere pennies.

 

Sounds good guys. I figured it was most likely a fluid problem. At least that's what I'm hoping. LOL. I really hope I don't have to replace any parts. I'll check the fluids tomorrow and let you guys know what the deal is, if you're interested.

 

Bleeding the clutch

Just in case you need a guide.

 

its the clutch master cylinder changed mine the other day lol pedal got so loose and wouldnt spring back i lost my clutch and couldnt even put it in gear