Team Integra Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5,536 Posts
the g2 integra transmissions were cable operated. g3 teg trannys are hydrolic. Therefore, a YS1 transmission WOULD bolt up, but you would need to replace your hydrolics lines for cable.
 

·
Registered
Joined
·
75 Posts
A couple of oter issues:

1) 93' GSR gears are not the best choice for an LS of any year. They are too high for an LS that is built to run in the lower RPMs.

2) The 93' Will also have a cable driven speed sensor in it. I believe all 94+ are electronic driven.

3) You will need the clutch for the 93'

4) Yes the clutch is cable operated. You should be looking into a hydralic trany.

5) Yes it will bolt up. But you are looking at alot of headaces.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top