Team Integra Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
I have replace the vss twice is one works when u test it with the ohm meter.so i am guessing it is my wiring.Does anyone know what wire and connector it is on the ecu and speedo?
 

·
Registered
Joined
·
105 Posts
Clean the Ground screw which is a long screw on the VSS, there are three screws, two to hold the VSS and 3rd one is one to ground. clean/brush the screw before you install again. Clean the Ground screw next to the Thermostat also, My Sppedometer is working great after the cleaning today. VSS is so simple which I doubt it is a problem.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top