[Project_teggy18]

Good day all, I have come into a snag and needing guidance/pics. I changed my header forcing myself to go single rad. I would like to tap into my existing wiring so it kicks on and off on its own without a manual interior switch. Can’t find much and I’m new to the forum and slow at navigating.

 

[Project_teggy18]

Which is why I needed someone else’s brain. I’m over thinking things. Is it possible to only run one fan and keep a/c or do I need a secondary one and put it in the other side of the radiator. Thanks for your help.

 

[Project_teggy18]

My man!!!! Lots of appreciation.

 

[Project_teggy18]

Just splice into the factory wiring harness for the fans. And it will operate as stock. Did the same thing to mine and works perfect and kept AC and PS too. View attachment 108465

Just splice into the factory wiring harness for the fans. And it will operate as stock. Did the same thing to mine and works perfect and kept AC and PS too. View attachment 108465

Thanks man. I noticed you wrapped your a/c line as you can see mine is actually touching the header. Looks like I’ll be doing the same. Thanks for the picture.