Team Integra Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
318 Posts
Discussion Starter · #4 ·
Thanks Micheal,
I am asking this because a friend of mine here in Curacao, bought the Civic Type R 2002(compr ratio 11.5:1) from Arospeed (white civic with arospeed decal, from the US) and the engine broke, apparently of lean out of gas.

We can get here 92 octane Unleaded and 95 Octane Unleaded.
It happened using 95 octane fuel.
Since I bought a DC2 SIR Integra B18C, I wanted to know if 95 octane is ok for my car, before I blow it up!

let me know your ideas,
 

·
Registered
Joined
·
236 Posts
hrmm i didnt know that the usdm and jdm motors mattered when it came to octane levels.. I know that the vtec motors like gsr and type r regardless of usdm or jdm should run the highest possible octane.. But i wouldnt think it would die out if you used 92, i mean if thats the highest we can get then thats the highest.. and about your friends car i dunt know but 92-95 should be good enough octane rating.. not unless rated otherwise by the OEM.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top