Team Integra Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
215 Posts
Discussion Starter · #1 ·
when installling the koni yellows, there are two sections on the shock that you can mount the braket to put the spring on. Does anyone know which setting is the right one, the top one or the bottom when. I have the H&R Sport springs which are 1.75/1.5
 

·
Registered
Joined
·
11,935 Posts
I made the mistake of putting it in the middle and got a suprise. I then put it as high up as possible and now I have about 1/2" from well to tire (215's).
 

·
Registered
Joined
·
5,854 Posts
Edited by white_rice at 02/18/2004 02:45:37 AM
Yeah, those notches are there to adjust your ride height via the shock. If you are on adjustable springs, then they are not of much use at all. If you just have non-adjustable springs, then they may come in handy if you want to raise/lower your teg a 1/4".


In Reply To:
its really up to which one u want it on. my neuspeed/koni yellows have 5 notches that you can adjust. pick the notch that u feel your teg will look best at
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top