Team Integra Forums banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
564 Posts
Discussion Starter #1
Hey im putting an LED in the car and it says to hook up one wire to constant 12v one to ground and the other to the ignition. So i did the ground 12v and i hooked the yellow wire up to the ignition (black/yellow wire) and the light doesnt blink any idea on wut i did wrong?

Do i not hook it up to the black/yellow wire?
 

·
Administrator
Joined
·
43,014 Posts
depends on the LED.. they do not typically blink on their own...

unless the LED you got specifically says "blinking", then you bought the wrong one
 

·
Registered
Joined
·
564 Posts
Discussion Starter #4
i got one of those fake alarm led's from visions. its a blinking one and it has two wire from the bulb to a box then 3 wires coming out of the box. red, black, yellow
 

·
Administrator
Joined
·
43,014 Posts
so let me get this straight...

there's 3 wires that need to get hooked up, yet you only hooked up two.. and you are asking "why doesn't it work"

following directions goes a long way installing stuff
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top