Team Integra Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
744 Posts
Discussion Starter #1
Since the local places all want $100+ for the installation of my keyless, i'm gonna try to do it myself instead. But I need some help.

What I am looking for are the following wires:

Door Lock Output (-)
Door Unlock Output
+12 Volt Parking Light Output
+12 Volt Constant Power Input
Dome Light Output
Chassis Ground Input
Ground When Locked Output
Channel #2 Output
Channel #3 Output
"Honk Horn" Output
Second Unlock Pulse(passenger's) Output
+12 Volt Ignition Input

I have experience with electronics, but i've never done anything like a keyless entry so i'm pretty much starting from scratch here.

So any tips anyone could give would be great.

If it works out, i'd be happy to make an article out of it. Thanks!
 
1 - 3 of 3 Posts
Top