Team Integra Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Hey guys, i need help. I am a dumbass and after searching on here i found alot of help on why i'm getting a cel 21 after my gsr into ls obd1 swap. I need a vtec wire or wires. What i couldnt find was specific instructions on how to do so. I put a jdm b18c1 in my 94 ls that had no motor to begin with and i used a usdm gsr harness. Would i need to add wires from the end of the gsr harness through the firewall to the ecu? or would i need to add them altogether ??
Please help, i want my vtec!!

ALSO
Anyone know what these two plugs go to?

 

·
Registered
Joined
·
470 Posts
In a related question, can I ask, WreckedGSR, what you all needed for the swap besides the GSR longblock? I know you'd need intake arm and ECU, but what about drive axles, shift linkage etc? Or are those things all the same?

To summarize: If I bought a GSR longblock, what else would I have to source out for a swap into my RS?
 
1 - 7 of 7 Posts
Top