Team Integra Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter #1
I was told"the generation Two Integra was from 1990-1993 and the Generation Three Integra was 1994-2001 However Honda used the 25 tooth spline Y1 J1 S1 trannsmission from 1988-1991 Integra and CRX. In 1992 Honda started using the YS1 then the S80 Y80 Y21 S4C S80 Trannsmissions in the Integras and Civics which all share the same 26 tooth spline shaft. So although the transmissions spread out over Nine years and Two generations of integras and between Hydraulic and cable operated clutches they all share the same clutch."
 

·
Registered
Joined
·
314 Posts
The clutch and pressure plate are the same thing, the throw out bearing are however different from the 2nd gen to the 3rd get due to the cable to hydro switch.
 
1 - 6 of 6 Posts
Top