[RedLIghT97]

Searched 41 pages with no luck, i ordered a spoiler from spoilerdepot, sould be here in a bout a week and a half. I'll be installing in myself on my 97 LS, i know about the underside markings on the trunk, but i don't know what size drill bits i'll be needing, some info would be highly appreciated guys. Thanks a lot

 

[steveyenisch]

1/2 inch should probably do it.

 

[BSQ5]

1/2 inch should probably do it.

Oh no, 1/2" is way to big. You will need a 5/16" drill bit. You can refer to these rear wing installation instructions. The say to first use a 3mm, then 6mm and then finally a 8mm (5/16") drill bit.

 

[airmanusn]

those instructions say 2000 civic 2 door not integra. I wasn't sure if theyt were the same or not since we have hatches and civics have trunks