Team Integra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
917 Posts
Im not sure i follow "stripped" but the spline shaft that goes through the hub is stripped so all the splines are broken off? or the threads at the end held on by a big nut are stripped? has the inner side of the shaft (where it goes into the tranny) pulled out of the tranny? or still locked in?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top