I was wondering if anyone knew how to properly open the valve cover and replace the valves on a 94-01 gsr, i was wondering if anyone can give me a step by step procedure, and the do's and not to do's about replacing valves. thank you for the response.
It's a little more complicated than just removing the valve cover buddy ... try, removing the head of the motor ... dissembling the head and changing many parts (ton's of seals, gaskets, washers .. etc). Go get a HELM's manual before you even think of doing this yourself... I would recomend getting a shop to do this unless you really know what your doing and have lots of experiance and tools... If you snap a head bolt while trying to remove the head ... expect to be out a couple hundred dollars (at least!) and a newfound understanding of the word "frustrated"..