Do all Acura 'exhaust finishers' (tips) use the exact same bolt size? I ask because I am considering putting a non-Integra (possibly TSX or S2000) exhaust tip on my stock GS-R muffler.
EDIT: I should probably add that the stock Integra exhaust tips use 6x14 bolts. The S2000 uses the exact same bolt, but the TSX uses a 6x12. Does this mean that both would work?
EDIT: I should probably add that the stock Integra exhaust tips use 6x14 bolts. The S2000 uses the exact same bolt, but the TSX uses a 6x12. Does this mean that both would work?