Team Integra Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
54 Posts
on the G2 integra, the VSS is part of the gauge cluster. It outputs 4 pulses per revolution of the speedometer cable. Its output goes to the ECU.
 

·
Registered
Joined
·
432 Posts
The VSS is located on the transmission. If you replaced the cable, you would have seen it. It's huge. It has two rubber lines (that carry power steering fluid to it, for lubrication)... It is secured by 1 - 10mm bolt that you'll need a long extension and a swivel joint to get to.

Make sure the cable is plugged into the speedo all the way as well as the VSS, this is more than likely why your getting a code 17.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top