Search Results for ‘need help’

I bought a 96 GS-R from my aunt for my first car. I need to rebuild the engine, because he treated it horribly. Do you guys have any suggestions for products, parts, ect. that I might need? Thanks.

1999 Teg, got a flat on the highway(front left), new tire mounted and balanced and since has had an extremely aggressive pull to the right. Went and got an alignment and was told my strut was bent and they can only fix it so much, put coilovers on it and it still has the same aggressive pull...

My 97 GSR srs light recently came on, I've seen on older Hondas you can read the code using the short-circuit OBD2 hack or with a 2-pin connector short. My problem is that on the underdash of the car (both driver and passenger side) there exists no 2-pin connector, and when I try the paperclip...

I may be posting this in the wrong thread and if so I apologize. I have a 94 integra ls 5-speed, my block was screwed so I bought a full b18b1 pulled from an 99 auto integra, I swapped the flywheel, clutch, transmission. And throttle body. I dropped it in my teggy and I’m using the same wiring...

I bought my car and soon discovered I didn't look over the car nearly enough before I bought it. I found new blinker hubs and day running lights but the corner tiny bulbs and their connectors are seemingly impossible to find. I can only find the connectors I need on eBay but I still can find...

Got my car a few weeks ago, previous owner had it lowered WAYYY too low, today I decided to raise it up. After the job I took it for a drive and maybe I didn't notice at first, but 5-10 mins in I noticed a knocking sound coming from somewhere in the front of the car. I can't pinpoint a location...

I had just recently bought an '01 GSR with 89,000 miles on it as a young car enthusiast (17) and im stumped on figuring out whats wrong with my motor and how I can get it running healthy again. It's a bonestock b18b1 with some cheap aftermarket parts in some areas. I had drove the car within the...

So I recently lowered my integra and during the alignment I wasn’t about to correct enough rear toe. Do I need adjustable lower control arms?

So I have a 96 integra that has abs and I also have a 97 that I’m using as a parts car that doesn’t have abs. I was wondering could I use the same front brake lines the prop valve? I’m solid or am I missing something or do I need to swap other parts over too?

Hello this is my first post here. I am currently trying to do a manual steering conversion but I'm not sure where I can find the manual conversion for a RHD. If anyone knows where or how I can get one or any other options to do the conversion please let me know. Thank You

Hey starting a new thread as I'm having the most difficult time finding a definite answer to my specific case. Is a read but figure more info the better if you'd like to tackle this one. Brief vehicle description, what problems I've had, what I've diagnosed, what parts have been replaced with...