Team Integra Forums banner

Search results

1-20 of 183 Results
Advanced Search
  1. water in my head after 4 head gaskets

    Generation Three
    I don't see it mentioned here, but is there any chance that the turbo is leaking water into the oil internally? If its not too hard I would bypass the water cooling and see if you're still getting water into the block.
  2. F/S: Momo Steering Wheel

    For Sale Section - Parts
    This is the perfect steering wheel for the Integra. I have the same one in black leather w/ red stitching along with the same hub and the steering wheel size and placement is perfect. If you still have power steering this wheel will stiffen it up quite a bit and make turn in more responsive.
  3. First Turbo Build; Final Assembly Questions

    Forced Induction
    One more thing to note, if you're tuning it yourself, I would drop in the new fuel pump/injectors/ecu while the car is still naturally aspirated and tune the entire vacuum portion. This is way easier without the turbo installed on the car. Then once you bolt on the turbo kit you'll just need to...
  4. First Turbo Build; Final Assembly Questions

    Forced Induction
    I know I need a clutch kit, throwout is trashed and I'm not really sure what other bearings/seals or whatever will need to be replaced For the clutch you'll need: clutch, pressure plate, flywheel, throwout bearing, pilot bearing. Its up to you whether you want to upgrade to ARP flywheel bolts...
  5. WTB JDM ITR front bumper

    Wanted Section - Parts
    PM'd. Shoot me a text, I have a white one ready to go in NYC.
  6. UKDM Integra R Cluster with 170mph Speedo

    For Sale Section - Parts
    That was quick. Sold to jjkz24.
  7. B18C1 Transmission problem

    Generation Three
    Did you do the case swap yourself? Does the shifter move at all when you try to change gears? It sounds like the shift change holder/shift forks were not set up correctly when the case was open. Is it possible that you have the LS shift fork in the transmission with the gsr gears and not the...
  8. What Kind Of Turbo Should I Buy?

    Forced Induction
    Nothing you posted is worth spending money on. Do some more research on here, there are a few build threads that list out all of the parts you could possibly need and where to get them. For intercooler piping you should go with a SRE piping kit or something similar (go autoworks, etc). I've...
  9. UKDM Integra R Cluster with 170mph Speedo

    For Sale Section - Parts
    Up for sale is my UKDM Integra type R cluster. I had this cluster shipped over from Germany 3 years ago. This cluster gives you all of the greatness that comes with a JDM-R cluster, such as the yellow needles, faux carbon fiber bezel, and 10k RPM tachometer. However, unlike the JDM clusters...
  10. Opinions on LS/VTEC turbo setup (11.1 compression)

    Forced Induction
    You will be fine using a short piece of 2.5" and then flare it out to a 3" downpipe, but it won't be as pretty. I'm interested to see some pictures of your setup. Is it a 5 bolt or 4 bolt turbo? I was thinking of switching to the BWR ram horn in the future but my engine bay already feels like a...
  11. Map sensor for lsv turbo

    Performance
    I ran an Omni 4 bar for 3 years but it finally crapped out on me. Over those 3 years I only put around 5000 miles on the car. I've since swapped in a Hondata 4 bar (essentially the same thing) and its been working fine since. The perks of the plug and play sensor is that if it fails you can...
  12. Opinions on LS/VTEC turbo setup (11.1 compression)

    Forced Induction
    Who is tuning your car? What cams are you using? A good tuner should be able to get you around 350whp without breaking anything. ITR cams or skunk2 tuner 1's will make it easier. If you're tuning it yourself I would take it slow with cast pistons and high compression.
  13. SOLD- LS Eagle Rods -SOLD

    For Sale Section - Parts
    Sold to me.
  14. SOLD- LS Eagle Rods -SOLD

    For Sale Section - Parts
    PM'd. Forgot to ask, what pistons did you use these with?
  15. WTB: Brand new transmission

    Wanted Section - Parts
    Even better.
  16. WTB: Brand new transmission

    Wanted Section - Parts
    Shipping is ~$185. The total cost works out to $2,453.00 from acuraoemparts.com.
  17. WTB: Brand new transmission

    Wanted Section - Parts
    Update, found the part numbers for the brand new manual transmissions: 20011-P80-A52 -LS 20011-P80-J41 -Type R 20011-P80-V42 - GSR According to the site, "See Part#20011-P80-J41 for Integra 3-Dr Type-R and Part#20011-P80-V42 for all GS-R models" For reference, all 3 models are ~$2300 right...
  18. WTB: Brand new transmission

    Wanted Section - Parts
    Is it possible to get a complete transmission? I can't find it on the parts catalogue. Came across this one too. $2700...seems a little steep for a new transmission, no?
  19. WTB: Brand new transmission

    Wanted Section - Parts
    My friend is looking to buy a brand new hydro GSR or Type R transmission. He wants to go the new route since we have not had much luck with used transmissions recently and he wants the transmission to come without some other car's vin on it. A few years ago you could pick up a brand new...
  20. Da1witskilz's Turbo LS on the Dyno (again)

    Forced Induction
    I actually have a freshly machined B16 cylinder head with GSR cams sitting on the shelf. I am weary to do an LS/V right now because I would want to throw forged internals in the bottom end while I'm in there. I am however thinking of throwing a set of Crower 62404's as they have good reviews but...
1-20 of 183 Results
Top