Team Integra Forums banner

Search results

1-20 of 200 Results
  1. danteisme's 1996 DB8-Found and Rebuild Thread

    Your Integra
    Yeah its just the lighting, one was further back from the ceiling light. Both were re-done with the same color.
  2. danteisme's 1996 DB8-Found and Rebuild Thread

    Your Integra
    So, still cutting away bad metal and prepping areas for good metal. Nothing really worth showing, but i am still making progress here and there with this rust repair in this quarter. I did finish another side project though. I finished my leather restoration (for the front seats so far, still...
  3. danteisme's 1996 DB8-Found and Rebuild Thread

    Your Integra
    Small, but neat updated. I did some much needed cleaning in the garage this weekend so i have room to work, so no additional work on the car. BUT, i did clear up some space because someone messaged me from one of my craigslist ads. they wanted me tan cloth seat set i had from the car. it was...
  4. danteisme's 1996 DB8-Found and Rebuild Thread

    Your Integra
    Thats how i'm taking it at this point. Just roll with the car's punches basically.
  5. danteisme's 1996 DB8-Found and Rebuild Thread

    Your Integra
    Ugh, so...the car has decided to change my plans for me. After doing some exploratory cutting and assessing the situation, i think primer and paint is completely out of the realm of possibilities before cooler temps hit. I really was not expecting the rust to be so bad on this side of the...
  6. We Are Live - Community Feedback

    Community Help
    Yup, same thing. Glad its not just me, i bookmarked a bunch of articles and they all say the same thing.
  7. Clutch only has pressure when it’s 95 degrees or hotter outside

    Generation Three
    Thats an interesting issue, i dont think i've come across that one yet. Is the rubber line (assuming its still the OE style) in good shape?
  8. We Are Live - Community Feedback

    Community Help
    I'm just now starting to get back into looking through all of the new forum items. Stupid question, and forgive me if it was already discussed and i havent found it yet....but where are the articles?
  9. 93 integra gs exhaust system

    Generation Two
    i bought flange that would bolt up to the back of the cat and match the outlet size, and i found some exhaust reducers that will gradually reduce from my 2.5 to 2.25" exhaust, both on ebay. When i get to the exhaust part of my project, i'm just going to take it to a local shop and have them...
  10. Major power loss over 5% throttle when hot/limp mode? Help!!

    Generation Three
    Right, check the voltages to make sure they are within spec, i want to say it was .50 volts closed throttle and 4.5 or 5 with the throttle completely opened. I cant recall for certain, but there are threads around on that. Stuck in open loop may not necessarily mean a bad o2 sensor as i am...
  11. Major power loss over 5% throttle when hot/limp mode? Help!!

    Generation Three
    Two additional things for you to look at. 1. Throttle position sensor - i had that go goofy on me when the car got to operating temps and it would buck back and forth and lose power intermittently. 2. Car stuck in open loop - i'm currently fighting that issue on my car. When it hits...
  12. 93 integra gs exhaust system

    Generation Two
    You wouldnt have to return the header, you can "bottleneck" the exhaust. For a stock engine, i wouldnt be worried about the bottleneck. I mean, thats how the JDM type-r exhaust is. Its got the header with the 2.5" collector, and it necks down at the cat and then reduces to 2.25" or right...
  13. 93 integra gs exhaust system

    Generation Two
    What modifications do you currently have that you need a 2.5" exhaust? 2.5" will greatly reduce back pressure, but if you don't have the mods to support it you will probably hurt the performance of your car more than help it.
  14. Any Jaloppers around here? Interesting read about the GSR used in F&F

    Generation Three
    I watched the interview between Craig and Bill a couple of weeks ago, his interviews are quite good!
  15. rear quarter panel

    Appearance
    Thats a very labor intensive process. I'm going through the same process on my car, but for rust repair. I've drilled out about 60-70 spot welds so far to start the replacement.
  16. oem cruise control

    Audio, Security and Electrical
    well thats weird, i had to download a service manual to find out the fuse location that actually says where the cruise control fuses are at
  17. oem cruise control

    Audio, Security and Electrical
    well, can you tell me where its at then?
  18. oem cruise control

    Audio, Security and Electrical
    ok, im finally gettin some time to start diagnosing my cruise control problem with my car. the problem is it just randomly stopped working. it worked fine ever since i bought the car, then the one day i stopped to get gas, went back on the interstate and when i tried to activate the cruise...
  19. wtb: 185 65 14

    PA Forum
    lookin for some halfway decent all season 185 65 14 or witner treads doesnt matter. just need something to get me thru the next couple months. let me know if you got anything
  20. wtb: oem wheels(feeler)

    For Sale Section - Parts
    nah, thats why i want wheels without tires and as close to me as possible
1-20 of 200 Results
Top