Team Integra Forums - Team Integra - HeroOfTheDay
Old

G2 Blower Motor Removal and Cleaning

Posted 07-08-2008 at 10:56 PM by HeroOfTheDay

Unfortunately, this is a bit more complicated than removing the blower motor from a G3. In our G2's, the motor will not simply unbolt and slide downward out of it's casing, as the firewall/footwell slopes backwards into it's way. Tools you will need: Flathead Screwdriver Phillips Screwdriver 10mm Socket and Extensions Degreaser or Soap Small Brush (Toothbrush) Estimated Time: Anywhere from one to two hours, depending on how much time you take to clean everything out. Here you can see the three 10mm...
HeroOfTheDay's Avatar
Senior Member
Posted in Body
Views 4089 Comments 0 HeroOfTheDay is offline Edit Tags
 
For the best viewing experience please update your browser to Google Chrome