Join Date: Jul 2018
Feedback Score: 0 reviews
1996 integra with b20 swap missing ECT gauge sending wire
thank you for reading my post. hope somebody can help me.
my temp gauge hasnt worked since i got the car and have been able to diagnose that the ect sending wire is missing from the harness. (yellow/green single wire under the dizzy)
can someone help me figure out how to reattach this wire? or how i could connect it directly to the gauge?
i would like to know the color of the wire to solder to, its location (either by dizzy harness or by shock tower harness) OR how i would go about wiring this sensor clip directly to the cluster temp gauge.
i got one of those single sender slips from a junk yard with enough wire, but have no idea which wire in the harness to connect it to.
thank you.appreciate any input. searching has not got me too far in three months.