Team Integra Forums banner

B18c limp mode no cel

2K views 3 replies 3 participants last post by  rguttenb 
#1 ·
Hey guys im literaly lost for ideas and wondering if anyone can help..
I have an eg with a b18c (uk car jdm motor)
Its been dry stored for 5 years but its stuck in limp mode (fuel cuts at 4500 rpm)

So far i have
Changed the tps
Changed the distributor
Changed the ignitor
Changed the ecu p28 htune with b18c map
Tried a p30 virgin
Blown through the fuel lines
Checked the physical timing
Removed the engine loom and dont continuity to the plug
Removed the cat (possibly clogged)
Cleaned the grounds
Checked all the sensor plugs

I am now literaly out of ideas. If anyone has any ideas or advise i would really appreciate your time.

Thanks
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top