This will help you install an ITR or 94/95 GSR oil cooler in your 96+ GSR. It may also work for the LS or GS but I did not specifically do that.

Tools and items you will need:
- 10mm, 12mm, 14mm sockets
- 10mm, 12mm, 14mm opened end wrenches
- 2 crescent wrenches
- Groove joint pliers (channel locks)
- Standard pliers
- ITR or 94/95 GSR oil cooler
- 94/95 connecting pipe…or have a shop modify the one you have
- Rubber coolant...

You will need a good array of tools so listing them would be difficult. This is how to do the front bushings and rear pivot point bushing but, the rears are just as easy.

There are two kits needed to do this install.

1) Energy Suspension:
- 16.8102 front shock bushing ...top shock bushing included
- 16.3105G control arm bushing set…pivot point bushings included

2) Prothane:
- 8-212 front lower A-arm kit
- 8.211 front upper...