Acura Integra Climate Control Removal "Smart Hook" Tool
https://imgflip.com/memegenerator
For use in 3rd gen Acura/Honda Integra (94-01)
Made in the USA!
When it comes time to replace the bulbs in your climate control you're gonna need this tool to assist you!
Instead of using a blade screwdriver to pry out the hazard and defrost switches, use the Smart Hook to grab the back of the switch and pull....
Made from sturdy, hot rolled steel that won't bend or break when pulling out these switches.
I've been using the screwdriver method for years. Unfortunately, as the plastic gets brittle, the repeated prying efforts will cause the plastic to break, crack or get chipped. This reduces both the appearance and value of the part, and possibly your Integra...
The Smart Hook will preserve the integrity and appearance of your climate control bezel and switches.
Highly recommended for those of you with the Integra Type R climate control assembly. The faux carbon fiber interior parts are getting harder and harder to find. Please help us preserve these rare parts by using smart tools like this.
Very simple to use!
1. Start by sliding the tip of the tool in the rectangular slot beneath the switch (one end of the tool has a longer reach and the other is meant for your hand).
https://imgflip.com/memegenerator
https://imgflip.com/memegenerator
2. The depth of the switch and connector is about 4". As soon as you can rotate the tool, rotate 90 degrees.
https://imgflip.com/memegenerator
https://imgflip.com/memegenerator
3. Now give it a little tug straight back.
https://imgflip.com/memegenerator
4. Out comes the switch.
https://imgflip.com/memegenerator
5. Repeat on the next switch.
https://imgflip.com/memegenerator
6. This will now give you access to the screws hidden behind the switches.
https://imgflip.com/memegenerator
$20 shipped to the USA via PayPal or Venmo
*Shipping abroad/overseas extra
PM or reply if interested
Thanks for looking!
Tyler
https://imgflip.com/memegenerator
For use in 3rd gen Acura/Honda Integra (94-01)
Made in the USA!
When it comes time to replace the bulbs in your climate control you're gonna need this tool to assist you!
Instead of using a blade screwdriver to pry out the hazard and defrost switches, use the Smart Hook to grab the back of the switch and pull....
Made from sturdy, hot rolled steel that won't bend or break when pulling out these switches.
I've been using the screwdriver method for years. Unfortunately, as the plastic gets brittle, the repeated prying efforts will cause the plastic to break, crack or get chipped. This reduces both the appearance and value of the part, and possibly your Integra...
The Smart Hook will preserve the integrity and appearance of your climate control bezel and switches.
Highly recommended for those of you with the Integra Type R climate control assembly. The faux carbon fiber interior parts are getting harder and harder to find. Please help us preserve these rare parts by using smart tools like this.
Very simple to use!
1. Start by sliding the tip of the tool in the rectangular slot beneath the switch (one end of the tool has a longer reach and the other is meant for your hand).
https://imgflip.com/memegenerator
https://imgflip.com/memegenerator
2. The depth of the switch and connector is about 4". As soon as you can rotate the tool, rotate 90 degrees.
https://imgflip.com/memegenerator
https://imgflip.com/memegenerator
3. Now give it a little tug straight back.
https://imgflip.com/memegenerator
4. Out comes the switch.
https://imgflip.com/memegenerator
5. Repeat on the next switch.
https://imgflip.com/memegenerator
6. This will now give you access to the screws hidden behind the switches.
https://imgflip.com/memegenerator
$20 shipped to the USA via PayPal or Venmo
*Shipping abroad/overseas extra
PM or reply if interested
Thanks for looking!
Tyler