1990 da rebuild - Team Integra Forums

2000hondacivic · 03-22-2011, 03:08 PM

i bought a 90 teg for $1300 around the end of September 2010 and i am now in the process of completely rebuilding it, the interior was there kinda... so i just bought a whole new one for it. it was originally black and white and everyone that knew the car called it "the panda" but i have removed most the black on the passenger side and tried the driver but gave up this is how it i am doing a full shave/tuck with unknown motor plans for now this is goin to be a long long project

paint removal

its better...

i dont have pics but the whole passenger quater panel was replaced at some time which explains the two tone paint

cleaning the trunk

b18b1

painting the rims

ve got pics of the new interior believe it or not these are the seats and carpet that came in the car

this is the only bad part

i finally got the headlights working they did not work and the fogs were wired straight to the battery

so the car needed so many part i bought this shell for 300$

so i got the motor out its so dirty, got most of the paint off the valve cover since i absolutely hate splatter paint also got the dash out starting the tuck tonight

so for most recent updates not to much the bay is completely stripped, primered, and halfway sanded evap, blower motor box, and all the ducts are out so its just the firewall so i could swap the chassis harness from the black one i just got the rear trailing arms off last week and am in the process of installing energy suspension bushings i also dropped the leaking gas tank two weeks ago and should get a new one this week i will get pictures tomorrow

gsrteg98 · 03-22-2011, 03:12 PM

Wow, a lot of work going into this car! Looks great so far, any special plans?

2000hondacivic · 03-22-2011, 03:14 PM

no particular plans just make this car as nice as it should be i really just want a nice streetable car that i can bring to the track

2000hondacivic · 03-22-2011, 05:47 PM

more pictures

driver

passenger

bushings were smoked after 20yrs

gas tank out with big hole that needs to be fixed

hole from inside

dash

bay

one down one to go

how the car sits now

91_LS · 03-22-2011, 05:49 PM

Nice to see another G2 being saved,props bro,and good luck.

2000hondacivic · 03-22-2011, 05:52 PM

thank you also this is my first build

--Crash-- · 03-22-2011, 07:16 PM

I love DA builds, Makes me wish i still had mine

Can't wait to see what it looks like finished, Props on the super clean interior BTW

2000hondacivic · 03-22-2011, 09:25 PM

thanks i searched and found a killer deal the whole interior was $300 and i found every single piece for the interior from what i started with which was interior parts all over the car nothing put together bolts missing here and there car was the biggest pile ever i just wish it was in the car lol

2000hondacivic · 03-29-2011, 09:46 PM

started the shave the other day and got the new gas tank
after the second coat of undercoating

risingsun95 · 03-29-2011, 10:08 PM

Looking good man

2000hondacivic · 04-04-2011, 07:31 PM

just a couple more shave in progress pictures not much

also getting a full gsr swap this weekend

2000hondacivic · 04-12-2011, 02:51 PM

so i picked this up this weekend

jdm1990turbofreak · 06-21-2011, 04:39 AM

nice build lots of hard work put in the engine nice shit wit the swap

2000hondacivic · 09-14-2011, 10:05 AM

so its been a while since ive updated but so far ive got most of the suspension parts powder coated, got powder coated calipers new rotors, got a ES hyper-flex kit, started bondo on the bay (no pics), rebuilt the headlights and did a diy black housing, and did some odds and ends. currently i am working on cleaning the under body to truck bed line it, and waiting to for funds to order all my oem parts needed.
here some pictures

as it sits now

03-22-2011, 03:08 PM	#1 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	1990 da rebuild i bought a 90 teg for $1300 around the end of September 2010 and i am now in the process of completely rebuilding it, the interior was there kinda... so i just bought a whole new one for it. it was originally black and white and everyone that knew the car called it "the panda" but i have removed most the black on the passenger side and tried the driver but gave up this is how it i am doing a full shave/tuck with unknown motor plans for now this is goin to be a long long project paint removal its better... i dont have pics but the whole passenger quater panel was replaced at some time which explains the two tone paint cleaning the trunk b18b1 painting the rims ve got pics of the new interior believe it or not these are the seats and carpet that came in the car this is the only bad part i finally got the headlights working they did not work and the fogs were wired straight to the battery so the car needed so many part i bought this shell for 300$ so i got the motor out its so dirty, got most of the paint off the valve cover since i absolutely hate splatter paint also got the dash out starting the tuck tonight so for most recent updates not to much the bay is completely stripped, primered, and halfway sanded evap, blower motor box, and all the ducts are out so its just the firewall so i could swap the chassis harness from the black one i just got the rear trailing arms off last week and am in the process of installing energy suspension bushings i also dropped the leaking gas tank two weeks ago and should get a new one this week i will get pictures tomorrow

03-22-2011, 07:16 PM	#7 (permalink)
--Crash-- Senior Member Join Date: Oct 2007 Location: South County, MD Feedback Score: 2 reviews	I love DA builds, Makes me wish i still had mine Can't wait to see what it looks like finished, Props on the super clean interior BTW __________________ (98 Silver LS- ROLLED) (97 Milano Red LS- SOLD) (96 Cypress Green SE- SOLD) (00 Voltage Blue LS- DD) (00 Black Pearl GS-R- FS) (92 Frost White RS- SOLD) (90 Jasper Green DB1- SOLD) (87 Frost White LS- SOLD) (91 Melbourne DB1- SOLD) 9 And Counting!!!!!

03-29-2011, 10:08 PM	#10 (permalink)
risingsun95 Member Join Date: Jul 2006 Location: NY Feedback Score: 3 reviews	Looking good man __________________ "The difference between a democracy and a dictatorship is that in a democracy you vote first and take orders later; in a dictatorship you don't have to waste your time voting." - Charles Bukowski

03-22-2011, 03:12 PM	#2 (permalink)
gsrteg98 Senior Member Join Date: Oct 2010 Location: Coastal, ME Model: GSR Year: 1998 Feedback Score: 1 reviews	Wow, a lot of work going into this car! Looks great so far, any special plans?

03-22-2011, 03:14 PM	#3 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	no particular plans just make this car as nice as it should be i really just want a nice streetable car that i can bring to the track

03-22-2011, 05:47 PM	#4 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	more pictures driver passenger bushings were smoked after 20yrs gas tank out with big hole that needs to be fixed hole from inside dash bay one down one to go how the car sits now

03-22-2011, 05:49 PM	#5 (permalink)
91_LS Senior Member Real Name: Kyle Join Date: Mar 2008 Location: Carson, NV Model: Integra Year: 1991 Articles: 1 Feedback Score: 0 reviews	Nice to see another G2 being saved,props bro,and good luck.

03-22-2011, 05:52 PM	#6 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	thank you also this is my first build

03-22-2011, 09:25 PM	#8 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	thanks i searched and found a killer deal the whole interior was $300 and i found every single piece for the interior from what i started with which was interior parts all over the car nothing put together bolts missing here and there car was the biggest pile ever i just wish it was in the car lol

03-29-2011, 09:46 PM	#9 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	started the shave the other day and got the new gas tank after the second coat of undercoating

04-04-2011, 07:31 PM	#11 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	just a couple more shave in progress pictures not much also getting a full gsr swap this weekend

04-12-2011, 02:51 PM	#12 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	so i picked this up this weekend

06-21-2011, 04:39 AM	#13 (permalink)
jdm1990turbofreak Senior Member Real Name: joshua mansfield Join Date: Jun 2011 Location: Columbus GA Model: Acura Integra GS Year: 1990 Feedback Score: 0 reviews	nice build lots of hard work put in the engine nice shit wit the swap

Remove Advertisements Sponsored Links
Team-Integra.net Advertisement

09-14-2011, 10:05 AM	#14 (permalink)
2000hondacivic Junior Member Join Date: Oct 2010 Location: , WI Feedback Score: 0 reviews	so its been a while since ive updated but so far ive got most of the suspension parts powder coated, got powder coated calipers new rotors, got a ES hyper-flex kit, started bondo on the bay (no pics), rebuilt the headlights and did a diy black housing, and did some odds and ends. currently i am working on cleaning the under body to truck bed line it, and waiting to for funds to order all my oem parts needed. here some pictures as it sits now